The watch measures sleep and wake behavior by analyzing your movements.
*When you stay still for a certain period of time (for example, playing with your mobile phone or reading in your bed), the watch will regard your movement as sleeping and start tracking.
*If you get up and then walk for more than 25 steps, the watch will regard your movement as awakening and stop tracking.
The time duration for sleep tracking is from 8:00 p.m. to 9:00 a.m.
Please allow the VIRMEE APP to access your mobile phone's storage. Go to Profile > Permission settings > Storage permissions in the APP to check if the option of Storage permission is on.
The watch only records your sleeping data from 8:00 p.m. to 9:00 a.m.; it will not record the data for daytime sleep.
It usually takes 2 minutes to finish the data synchronization. Please stay on the APP page when synchronizing data.
The watch supports sleep tracking by default.
Please wear the watch with one finger's width below your wrist bone and ensure the watch fits snugly against your skin.
Like all heart rate monitoring products, the accuracy of the heart rate sensor is influenced by the individual's physiological status, the wearing position of the watch, and the type of sports.
To ensure the accuracy of heart rate data, please wear the watch with one finger's width (when not exercising) or two fingers' width (when exercising) below your wrist bone, and fit the watch snugly against your skin.
If you enable the option of Auto heart rate on the Device interface of VIRMEE APP, the watch will automatically test your heart rate every 10 minutes. You can also check the 24-hour heart rate diagram on the APP.
Based on the amount of reflected light that changes according to your blood volume, heart rate can be measured with optical sensors on the watch that infer heart rate.
Therefore, please fit the watch snugly against your skin, tap on the watch and ensure the indicators under your watch to flash green when testing your heart rate.
The watch will restore to factory settings. All data and settings will be erased.
About 5 to 7 days
If the watch can't receive push notifications from your mobile phone after pairing, please follow the instructions below.
Step 1: Unbind the watch with your mobile phone in VIRMEE APP.
Step 2: For iPhone, forget VIRMEE_XXXX in the Bluetooth settings of your mobile phone.
Step 3: Disable your phone's Bluetooth first, then enable it.
Step 4: Turn on the VIRMEE APP to search and connect to the watch's Bluetooth.
Note: For iPhone, ensure that you allow the watch to pair with and receive notifications from your mobile phone if there are pop-up windows. Otherwise, the watch won't be able to receive notifications.
Step 1: Download and install the VIRMEE APP on APP Store or Google Play, then register an account.
Step 2: Follow the in-APP instructions to create your profile.
Step 3: Turn on Bluetooth on your mobile phone.
Step 4: Turn on the watch, slide left/right to select Settings, then tap About to check the Bluetooth name of the watch.
Step 5: Tap Device > + > SEARCH AGAIN on the APP, then tap VT3 Lite-XXXX to connect.
Please allow the VIRMEE APP to access your mobile phone's contacts.
Yes, you can.
We suggest that you accurately fill out some basic information in VIRMEE APP, such as gender, age, height, weight, etc., which will improve the accuracy of the pedometer.
Currently, the watch could only identify running after you continuously exercise for 2-5 minutes, and ball games after you continuously play badminton or basketball for 5 minutes.
VT3 LITE can be paired with mobile phones currently.
The watch may disconnect with VIRMEE APP after you update the APP or replace your mobile phone. Try the instructions below:
Unpair the watch with your mobile phone, then repair them again.
Turn off the Bluetooth on your mobile phone and turn it on again.
Ensure the watch is not paired with other mobile phone.
No, you could turn off Bluetooth if you do not need to receive messages on the watch or synchronize data to your watch.
Ensure you have permitted the VIRMEE APP to run in the background on your mobile phone.
Ensure the watch's screen is on, and keep the watch near to your mobile phone (within 10 meters).
Allow VIRMEE APP to access your location; otherwise, it won't be able to search your watch.
Ensure the watch is not paired with other mobile phone.
Please allow the VIRMEE APP to access your mobile phone's storage. Go to Profile > Permission settings > Storage permissions in the APP to check if the option of Storage permission is on.
Ensure your mobile phone's network is in good condition.
Keep the watch as close to your mobile phone as possible.
Step 1: Go to your mobile phone's Bluetooth settings.
Step 2: Find your watch on the Bluetooth list, and then unpair it.
Step 3: Pair the watch with your mobile phone through VIRMEE APP again. During the pairing, please allow the watch to pair with and receive notifications from your mobile phone if there are pop-up windows.
Go to your mobile phone's settings, then disable the notifications permission for VIRMEE APP.
Turn off Bluetooth on your mobile phone.
Go to Device > Message Notification in the VIRMEE APP to block the APP from sending notifications to your watch.
No, VT3 LITE doesn't have a GPS sensor currently.
Raise your watch from a vertical to a horizontal position, and the screen will automatically light up.
Long press the power button for 3-4 seconds to power on/off the watch.
Step 1: Ensure you've paired the watch with your mobile phone.
Step 2: Set alarms in the VIRMEE APP, then swipe down on the Sport interface of VIRMEE APP to synchronize the data to your watch.
Step 1: Please download and install the VIRMEE APP, and then register an account.
Step 2: Turn on your mobile phone's Bluetooth. Launch the APP to search and connect to the watch's Bluetooth.
Step 3: The watch will automatically synchronize your mobile phone's time, date and week.
It takes about 1.5 hour to reach a full charge.
Step 1: Plug the USB end of the charging cable into a USB adapter, power bank, or a USB port.
Step 2: Hold the other end of the charging cable to approach the charging pins on the back of the watch until they attach magnetically.
*If the charging cable can't magnetically attach to the charging pins of the watch, please change the direction of it.
VT3 LITE is compatible with iOS 10.0 or later.
VT3 LITE is compatible with Android 5.0 or later.
Yes, it's waterproof and rated at IP68.
The packing list includes a VT3 LITE watch, spare two bands, a charging cable, and a user manual.
VT3 LITE doesn't come with a camera, but you can tap the watch to control your mobile phone to take photos after you enable the option of Easy Camera on the Device interface of VIRMEE APP.
No, you can't.
You can tap and hold the home screen to change the watch face.
Step 1: Turn over your watch, then press the quick-release lever inward and gently pull the original watch band away.
Step 2: Get another band, slide the pin into the notch on the watch, then press the quick-release lever inward and slide the other end of the watch band into place.
Step 3: Release the quick-release lever when the pins on both ends are securely inserted into the notch.
Die Uhr misst das Schlaf- und Wachverhalten, indem sie Ihre Bewegungen analysiert.
*Wenn Sie eine bestimmte Zeit lang stillstehen (z.B. beim Spielen mit Ihrem Mobiltelefon oder beim Lesen im Bett), betrachtet die Uhr Ihre Bewegung als Schlaf und beginnt mit der Überwachung.
*Wenn Sie aufstehen und dann mehr als 25 Schritte gehen, betrachtet die Uhr Ihre Bewegung als Erwachen und stoppt die Überwachung.
Die Zeitdauer für die Schlafüberwachung ist von 20.00 Uhr bis 9.00 Uhr.
Bitte erlauben Sie der VIRMEE APP den Zugriff auf den Speicher Ihres Mobiltelefons. Gehen Sie zu Profil > Permission settings > Storage permissions in der APP, um zu prüfen, ob die Option Storage permissions eingeschaltet ist.
Die Uhr zeichnet nur Ihre Schlafdaten von 20:00 Uhr bis 9:00 Uhr auf; sie zeichnet die Daten für den Tagesschlaf nicht auf.
Normalerweise dauert es 2 Minuten, bis die Datensynchronisation abgeschlossen ist. Bitte bleiben Sie bei der Datensynchronisation auf der APP-Seite.
Die Uhr unterstützt standardmäßig die Schlafüberwachung.
Bitte tragen Sie die Uhr einen Fingerbreit unterhalb Ihres Handgelenksknochens und stellen Sie sicher, dass die Uhr eng an Ihrer Haut anliegt.
Wie bei allen Herzfrequenz-Messgeräten wird die Genauigkeit des Herzfrequenzsensors durch den physiologischen Status der Person, die Trageposition der Uhr und die Art der Sportart beeinflusst.
Um die Genauigkeit der Herzfrequenzdaten zu gewährleisten, tragen Sie die Uhr bitte einen Fingerbreit (wenn Sie nicht trainieren) bzw. zwei Fingerbreit (wenn Sie trainieren) unterhalb Ihres Handgelenksknochens und legen Sie die Uhr eng an Ihre Haut an.
Wenn Sie die Option "Auto-Herzfrequenz"auf der Geräte-Schnittstelle von VIRMEE APP aktivieren, testet die Uhr Ihre Herzfrequenz automatisch alle 10 Minuten. Sie können auch das 24-Stunden-Herzfrequenzdiagramm auf dem APP überprüfen.
Basierend auf der Menge des reflektierten Lichts, die sich in Abhängigkeit von Ihrem Blutvolumen ändert, kann die Herzfrequenz mit optischen Sensoren an der Uhr gemessen werden, die auf die Herzfrequenz schließen lassen. Legen Sie die Uhr daher bitte eng an Ihre Haut an, tippen Sie auf die Uhr und stellen Sie sicher, dass die Anzeigen unter der Uhr beim Testen Ihrer Herzfrequenz grün blinken.
Die Uhr wird auf die Werkseinstellungen zurückgesetzt. Alle Daten und Einstellungen werden gelöscht.
Etwa 5 bis 7 Tage
Wenn die Uhr nach dem Koppeln keine Push-Benachrichtigungen von Ihrem Mobiltelefon empfangen kann, befolgen Sie bitte die nachstehenden Anweisungen.
Schritt 1: Lösen Sie die Verbindung der Uhr mit Ihrem Mobiltelefon in VIRMEE APP.
Schritt 2: Für das iPhone vergessen Sie VIRMEE_XXXX in den Bluetooth-Einstellungen Ihres Mobiltelefons.
Schritt 3: Deaktivieren Sie zuerst das Bluetooth Ihres Mobiltelefons und aktivieren Sie es dann.
Schritt 4: Schalten Sie VIRMEE APP ein, um nach dem Bluetooth der Uhr zu suchen und sich mit ihr zu verbinden.
Hinweis: Stellen Sie beim iPhone sicher, dass Sie der Uhr erlauben, sich mit Ihrem Mobiltelefon zu koppeln und Benachrichtigungen von Ihrem Mobiltelefon zu empfangen, wenn Pop-up-Fenster erscheinen. Andernfalls kann die Uhr keine Benachrichtigungen empfangen.
Schritt 1: Laden Sie die VIRMEE APP herunter und installieren Sie sie im APP Store oder in Google Play, und registrieren Sie dann ein Konto.
Schritt 2: Folgen Sie den In-APP-Anweisungen, um Ihr Profil zu erstellen.
Schritt 3: Schalten Sie Bluetooth auf Ihrem Mobiltelefon ein.
Schritt 4: Schalten Sie die Uhr ein, schieben Sie nach links/rechts, um Einstellungen auszuwählen, und tippen Sie dann auf Über, um den Bluetooth-Namen der Uhr zu überprüfen.
Schritt 5: Tippen Sie am APP auf Gerät > + > ERNEUT SUCHEN und dann auf VT3 Lite-XXXX, um eine Verbindung herzustellen.
Bitte erlauben Sie der VIRMEE APP den Zugriff auf die Kontakte Ihres Mobiltelefons.
Ja, das können Sie.
Wir schlagen vor, dass Sie einige grundlegende Informationen in VIRMEE APP genau ausfüllen, wie Geschlecht, Alter, Größe, Gewicht usw., wodurch die Genauigkeit des Schrittzählers verbessert wird.
Gegenwärtig kann die Uhr Laufen erst erkennen, wenn Sie 2-5 Minuten lang ununterbrochen trainiert haben, und Ballspielen erst, wenn Sie 5 Minuten lang ununterbrochen Badminton oder Basketball gespielt haben.
Derzeit unterstützt die Uhr nur die Bluetooth-Verbindung mit Mobiltelefonen und keine mobilen Geräte wie Tablets und Laptops
Die Uhr kann die Verbindung mit der VIRMEE APP trennen, nachdem Sie die APP aktualisiert oder Ihr Mobiltelefon ausgetauscht haben. Versuchen Sie die nachstehenden Anweisungen:
Koppeln Sie die Uhr mit Ihrem Mobiltelefon ab und koppeln Sie sie dann erneut.
Schalten Sie das Bluetooth auf Ihrem Mobiltelefon aus und schalten Sie es wieder ein.
Stellen Sie sicher, dass die Uhr nicht mit einem anderen Mobiltelefon gekoppelt ist.
Nein, Sie können Bluetooth ausschalten, wenn Sie keine Nachrichten auf der Uhr empfangen oder Daten mit Ihrer Uhr synchronisieren müssen.
Stellen Sie sicher, dass Sie zugelassen haben, dass die VIRMEE APP auf Ihrem Mobiltelefon im Hintergrund läuft.
Stellen Sie sicher, dass der Bildschirm der Uhr eingeschaltet ist, und halten Sie die Uhr in der Nähe Ihres Mobiltelefons (innerhalb von 10 Metern).
Erlauben Sie VIRMEE APP, auf Ihren Standort zuzugreifen; andernfalls kann es Ihre Uhr nicht durchsuchen.
Stellen Sie sicher, dass die Uhr nicht mit einem anderen Mobiltelefon gekoppelt ist.
Bitte erlauben Sie VIRMEE APP den Zugriff auf den Speicher Ihres Mobiltelefons. Gehen Sie zu Profil > Permission settings > Storage permissions in der APP, um zu prüfen, ob die Option Storage permissions eingeschaltet ist.
Stellen Sie sicher, dass das Netz Ihres Mobiltelefons in gutem Zustand ist.
Halten Sie die Uhr so nah wie möglich an Ihrem Mobiltelefon.
Schritt 1: Gehen Sie zu den Bluetooth-Einstellungen Ihres Mobiltelefons.
Schritt 2: Suchen Sie Ihre Uhr in der Bluetooth-Liste und trennen Sie dann die Verbindung.
Schritt 3: Koppeln Sie die Uhr über VIRMEE APP wieder mit Ihrem Mobiltelefon. Erlauben Sie der Uhr während der Kopplung, sich mit Ihrem Mobiltelefon zu koppeln und Benachrichtigungen von Ihrem Mobiltelefon zu erhalten, wenn Pop-up-Fenster erscheinen.
Gehen Sie zu den Einstellungen Ihres Mobiltelefons und deaktivieren Sie dann die Benachrichtigungserlaubnis für VIRMEE APP.
Schalten Sie Bluetooth auf Ihrem Mobiltelefon aus.
Gehen Sie zu Gerät > Do not disturb im VIRMEE APP, um das APP daran zu hindern, Benachrichtigungen an Ihre Uhr zu senden.
Nein, VT3 LITE hat derzeit keinen GPS-Sensor.
Heben Sie Ihre Uhr von einer vertikalen in eine horizontale Position an, und der Bildschirm leuchtet automatisch auf.
Drücken Sie den Netzschalter 3-4 Sekunden lang, um die Uhr ein- und auszuschalten.
Schritt 1: Stellen Sie sicher, dass Sie die Uhr mit Ihrem Mobiltelefon gekoppelt haben.
Schritt 2: Stellen Sie Alarme in VIRMEE APP ein, und fahren Sie dann mit dem Finger über die Sport-Schnittstelle von VIRMEE APP, um die Daten mit Ihrer Uhr zu synchronisieren.
Schritt 1: Laden Sie die VIRMEE APP herunter und installieren Sie sie, und registrieren Sie dann ein Konto.
Schritt 2: Schalten Sie die Bluetooth-Funktion Ihres Mobiltelefons ein. Starten Sie das APP, um die Uhr zu suchen und mit dem Bluetooth der Uhr zu verbinden.
Schritt 3: Die Uhr synchronisiert automatisch die Zeit, das Datum und die Woche Ihres Mobiltelefons.
Es dauert etwa 1,5 Stunden, bis die Uhr vollständig aufgeladen ist.
Schritt 1: Schließen Sie das USB-Ende des Ladekabels an einen USB-Adapter, ein Netzteil oder einen USB-Anschluss an.
Schritt 2: Halten Sie das andere Ende des Ladekabels fest, um sich den Aufladestiften auf der Rückseite der Uhr zu nähern, bis sie sich magnetisch befestigen.
*Wenn sich das Ladekabel nicht magnetisch an den Aufladestiften der Uhr befestigen lässt, ändern Sie bitte die Richtung des Ladekabels.
VT3 LITE ist mit iOS 10.0 oder höher kompatibel.
VT3 LITE ist mit Android 5.0 oder höher kompatibel.
Ja, sie ist wasserdicht und hat die Schutzklasse IP68.
Die Packliste enthält eine VT3 LITE-Uhr, zwei Ersatzbänder, ein Ladekabel und ein Benutzerhandbuch.
VT3 LITE hat keine Kamera, aber Sie können die Uhr antippen, um Ihr Mobiltelefon zum Fotografieren zu steuern, nachdem Sie die Option Easy Camera auf der Gerät von VIRMEE APP aktiviert haben.
Nein, das geht nicht.
Sie können auf den Startbildschirm tippen und diesen gedrückt halten, um das Ziffernblatt der Uhr zu ändern.
Schritt 1: Drehen Sie Ihre Uhr um, drücken Sie dann den Schnellspannhebel nach innen und ziehen Sie das originale Uhrarmband vorsichtig weg.
Schritt 2: Holen Sie ein weiteres Band, schieben Sie den Stift in die Kerbe der Uhr, drücken Sie dann den Schnellspannhebel nach innen und schieben Sie das andere Ende des Uhrarmbands an seinen Platz.
Schritt 3: Lassen Sie den Schnellspannhebel los, wenn die Stifte an beiden Enden sicher in die Kerbe eingeführt sind
La montre effectue l'analyse en fonction de vos mouvements pendant la journée et la nuit.
* Lorsque vous restez immobile pendant un certain temps (par exemple, jouer avec votre téléphone portable ou lire dans votre lit), la montre vous considère d'être endormi et déclenche le suivi.
* Si vous vous levez et que vous fassiez plus de 25 pas, la montre vous considère d'être réveillée et arrêtera le suivi.
La durée du suivi de sommeil est à partir de 20h00 à 9h00.
Veuillez autoriser l'application VIRMEE d'accéder au stockage de votre téléphone mobile. Allez à Profil> Permission settings > Storage permissions dans l'APP pour vérifier si l'option Storage permissions est activée.
La montre enregistre vos données de sommeil qu'à partir de 20h00 à 9h00 ; elle n'enregistre pas les données de sommeil pendant la journée.
La synchronisation des données prend généralement 2 minutes. Veuillez rester sur la page de l'APP lors de la synchronisation des données.
La montre prend en charge le suivi de sommeil par défaut.
Veuillez porter la montre à un doigt sous l'os de votre poignet et assurez-vous que la montre se tient parfaitement en contact avec votre peau.
Comme tous les produits de surveillance de la fréquence cardiaque, la précision du capteur de fréquence cardiaque est influencée par l'état physiologique de l'individu, la position de port de la montre et le type de sport.
Pour assurer l'exactitude des données de fréquence cardiaque, veuillez porter la montre à un doigt (lorsque vous ne faites pas d'exercice) ou deux doigts (lorsque vous vous entraînez) sous l'os de votre poignet, et assurez que la montre se tient parfaitement en contact avec votre peau.
Si vous activez l'option Rythme cardiaque automatique sur l'interface Dispositif de l'APP VIRMEE, la montre teste automatiquement votre fréquence cardiaque toutes les 10 minutes. Vous pouvez également consulter le diagramme de fréquence cardiaque de 24h/24 sur l'APP.
Étant donné que la montre se sert de capteurs optiques pour mesurer votre fréquence cardiaque, les données de votre fréquence cardiaque dépend de la quantité de lumière reflétée qui se varie selon votre volume sanguin.
Par conséquent, veuillez bien assurer que la montre se tient parfaitement en contact avec votre peau, puis sélectionnez sur la montre, et assurez-vous également que les indicateurs sous la montre clignotent en vert lorsque vous testez votre fréquence cardiaque.
La montre restaurera les paramètres d'usine. Toutes les données et paramétrages seront effacés.
Environ 5 à 7 jours
Si la montre ne peut pas recevoir de notifications push provenant de votre téléphone mobile après l'appairage, veuillez suivre les instructions suivantes.
Étape 1 : Dissociez la montre à partir de votre téléphone portable sur l'APP VIRMEE.
Étape 2 : Pour une iPhone, oubliez VIRMEE_XXXX dans les paramètres du Bluetooth de votre téléphone portable.
Étape 3 : Désactivez d'abord le Bluetooth de votre téléphone, puis réactivez-le.
Étape 4 : Démarrer l'application VIRMEE pour rechercher et vous connecter au Bluetooth de la montre.
Remarque : Pour les iOS, assurez-vous d'autoriser la montre à s'associer et à recevoir des notifications provenant de votre téléphone portable si des fenêtres contextuelles se présentent. Autrement, la montre ne pourra pas recevoir de notifications.
Étape 1 : Téléchargez et installez l'application VIRMEE sur APP Store ou Google Play, puis créez un compte.
Étape 2 : Suivez les instructions de l'application pour créer votre profil.
Étape 3 : Activez le Bluetooth de votre téléphone mobile.
Étape 4 : Allumez la montre, glisser vers la gauche/droite puis sélectionnez Réglages et ensuite À propos de pour vérifier le nom du Bluetooth de la montre.
Étape 5 : Sur l'APP, sélectionnez Dispositif > +> CHERCHER À NOUVEAU et puis VT3 Lite-XXXX pour vous connecter.
Veuillez autoriser l'application VIRMEE d'accéder au répertoire de votre téléphone mobile.
Oui, tout à fait.
Nous vous recommandons de remplir précisément certaines informations de base dans l'application VIRMEE, tel que votre sexe, âge, taille, poids, etc., ce qui aidera à améliorer l'exactitude du podomètre.
Pour le moment, la montre vous identifie d'être en train de courir après avoir fait de l'exercice en continu pendant 2 à 5 minutes, ou vous identifie de jouer aux jeux de ballon après avoir joué en continu au badminton ou au basket pendant 5 minutes.
Pour le moment, le VT3 LITE peut être connecté qu'à des téléphones mobiles. Il ne prend pas en charge les tablettes ou les ordinateurs portables.
Il se peut que la montre se déconnecte de l'application VIRMEE après la mise à jour de l'application ou si vous changez de téléphone. Veuillez suivre les instructions ci-dessous:
Déconnectez la montre à partir de votre téléphone portable, puis refaites l'appairage à nouveau.
Désactivez le Bluetooth de votre téléphone portable et réactivez-le.
Assurez-vous que la montre ne soit pas connectée à un autre téléphone portable.
Non, vous pouvez désactiver Bluetooth si vous ne souhaitez pas recevoir de messages sur la montre ou de synchroniser les données sur votre montre.
Assurez-vous d'avoir autorisé l'application VIRMEE à fonctionner en arrière-plan sur votre téléphone mobile.
Assurez-vous que l'écran de la montre soit allumé et gardez la montre à proximité de votre téléphone portable (dans 10 mètres).
Autorisez l'application VIRMEE d'accéder à votre localisation ; autrement elle ne pourra pas trouver votre montre.
Assurez-vous que la montre ne soit pas connectée à un autre téléphone portable.
Veuillez autoriser l'application VIRMEE d'accéder au stockage de votre téléphone mobile. Allez à Profil > Permission settings > Storage permissions dans l'APP pour vérifier si l'option Storage permissions est activée.
Assurez-vous que le réseau de connexion de votre téléphone mobile soit en bon état.
Gardez la montre aussi proche que possible de votre téléphone portable.
Étape 1 : Allez aux paramètres Bluetooth de votre téléphone mobile.
Étape 2 : Trouvez votre montre dans la liste de Bluetooth, puis déconnecté.
Étape 3 : Associez à nouveau la montre à votre téléphone portable via l'application VIRMEE. Pendant l'appairage, veuillez autoriser la montre à s'associer et à recevoir des notifications provenant de votre téléphone mobile s'il y a des fenêtres contextuelles.
Allez aux paramètres de votre téléphone mobile, puis désactivez l'autorisation de notification pour l'application VIRMEE.
Désactivez le Bluetooth de votre téléphone mobile.
Dans l'APP VIRMEE, allez dans Dispositif>Do not disturb pour empêcher l'application d'envoyer des notifications à votre montre.
Non, le VT3 LITE n'est pas doté de capteur GPS pour le moment.
Passez la montre d'une pose verticale à une position horizontale et l'écran s'allumera automatiquement.
Maintenez le bouton d'alimentation pendant 3-4 secondes pour allumer/éteindre la montre.
Étape 1 : Assurez-vous d'avoir connecté la montre à votre téléphone portable.
Étape 2 : Configurez les réveils dans l'application VIRMEE, défilez vers le bas jusqu'à l'interface Sport de l'application VIRMEE pour synchroniser les données à votre montre.
Étape 1 : Veuillez télécharger et installer l'application VIRMEE, puis créer un compte.
Étape 2 : Activez le Bluetooth de votre téléphone mobile. Lancez l'application pour rechercher et vous connecter au Bluetooth de la montre.
Étape 3 : La montre se synchronise automatiquement à l'heure, à la date et la semaine sur votre téléphone portable.
Il prend environ 1.5 heures pour une charge complète.
Étape 1 : Branchez la fiche USB du câble de recharge à un adaptateur USB, batterie externe ou un port d'alimentation USB.
Étape 2 : Rapprochez les broches de recharge de l'autre extrémité à l'arrière de la montre jusqu'à ce qu'elles se fixent magnétiquement.
* Si le câble de recharge ne se fixer pas magnétiquement aux broches de recharge de la montre, veuillez changer la direction.
Le VT3 LITE est compatible avec iOS 10.0 ou une version ultérieure.
Le VT3 LITE est compatible avec Android 5.0 ou une version ultérieure.
Oui, il est étanche, indice IP68.
Le paquet comprend une montre VT3 LITE, deux bracelets de rechange, un câble de recharge et un manuel d'utilisation.
Le VT3 LITE n'est pas doté d'un appareil photo, mais vous pouvez appuyer sur la montre pour contrôler votre téléphone portable et prendre des photos après avoir activé l'option Easy camera sur l'interface Dispositif de l'APP VIRMEE.
Non, pas du tout.
Maintenez le doigt sur l'écran d'accueil pour changer le cadran de la montre.
Étape 1 : Retournez la montre et puis pressez la goupille vers l'intérieur et retirez doucement le bracelet d'origine.
Étape 2 : Prenez l'autre bracelet, faites glisser la goupille dans l'orifice de la montre, puis pressez la goupille vers l'intérieur et insérez l'autre extrémité du bracelet de la montre.
Étape 3 : Relâchez lorsque la goupille aux deux extrémités sont correctement insérées dans l'orifice.
L'orologio misura il comportamento del sonno e della veglia analizzando i tuoi movimenti.
* Quando rimani fermo per un certo periodo di tempo (ad esempio, giocando con il tuo cellulare o leggendo nel tuo letto), l'orologio considererà il tuo movimento come se dormisse e inizierà a seguirlo.
* Se ti alzi e poi cammini per più di 25 passi, l'orologio considererà il tuo movimento come un risveglio e smetterà di seguire.
La durata del monitoraggio del sonno è dalle 20:00. fino alle 9:00.
Consenti all'APP VIRMEE di accedere alla memoria del tuo cellulare. Vai su Profilo> Permission settings > Storage permissions nell'APP per verificare se l'opzione di Storage permissions è attiva.
L'orologio registra i dati del sonno solo dalle 20:00. alle 9:00; non registrerà i dati per il sonno diurno.
Di solito sono necessari 2 minuti per completare la sincronizzazione dei dati. Rimani sulla pagina APP durante la sincronizzazione dei dati.
L'orologio supporta il monitoraggio del sonno per impostazione predefinita.
Indossare l'orologio con la larghezza di un dito sotto l'osso del polso e assicurarsi che l'orologio aderisca perfettamente alla pelle.
Come tutti i prodotti per il monitoraggio della frequenza cardiaca, la precisione del sensore della frequenza cardiaca è influenzata dallo stato fisiologico dell'individuo, dalla posizione dell'orologio e dal tipo di sport.
Per garantire l'accuratezza dei dati sulla frequenza cardiaca, indossare l'orologio con la larghezza di un dito (quando non si fa esercizio fisico) o la larghezza di due dita (quando ci si esercita) sotto l'osso del polso e posizionare l'orologio comodamente contro la pelle.
Se abiliti l'opzione Auto frequenza Cardiaca sull'interfaccia del dispositivo dell'APP VIRMEE, l'orologio testerà automaticamente la tua frequenza cardiaca ogni 10 minuti. Puoi anche controllare il diagramma della frequenza cardiaca su 24 ore sull'APP.
In base alla quantità di luce riflessa che cambia in base al volume del sangue, la frequenza cardiaca può essere misurata con sensori ottici sull'orologio che deducono la frequenza cardiaca.
Pertanto, si prega di adattare l'orologio perfettamente alla pelle, toccare sull'orologio e assicurarsi che gli indicatori sotto l'orologio lampeggino in verde durante il test della frequenza cardiaca.
L'orologio verrà ripristinato alle impostazioni di fabbrica. Tutti i dati e le impostazioni verranno cancellati.
Da 5 a 7 giorni circa o
Se l'orologio non può ricevere notifiche push dal tuo telefono cellulare dopo l'accoppiamento, segui le istruzioni di seguito.
Passo 1: scollega l'orologio dal telefono cellulare nell'APP VIRMEE.
Passo 2: per iPhone, dimentica VIRMEE_XXXX nelle impostazioni Bluetooth del tuo telefono cellulare.
Passo 3: disabilita prima il Bluetooth del telefono, quindi abilitalo.
Passo 4: attiva l'APP VIRMEE per cercare e connettersi al Bluetooth dell'orologio.
Nota: per iPhone, assicurati di consentire all'orologio di accoppiarsi e ricevere notifiche dal tuo telefono cellulare se sono presenti finestre pop-up. In caso contrario, l'orologio non sarà in grado di ricevere notifiche.
Passo 1: scarica e installa l'APP VIRMEE su APP Store o Google Play, quindi registra un account.
Passo 2: segui le istruzioni in-APP per creare il tuo profilo.
Passo 3: attiva il Bluetooth sul tuo telefono cellulare.
Passo 4: accendi l'orologio, scorri verso sinistra / destra per selezionare Impostazioni, quindi tocca Info per controllare il nome Bluetooth dell'orologio.
Passo 5: tocca Attrezzature> +> CONTROLLA sull'APP, quindi tocca VT3 Lite-XXXX per connetterti.
Consenti all'APP VIRMEE di accedere ai contatti del tuo cellulare.
Si, puoi.
Ti suggeriamo di compilare accuratamente alcune informazioni di base nell'APP VIRMEE, come sesso, età, altezza, peso, ecc., Che miglioreranno la precisione del contapassi.
Attualmente, l'orologio è in grado di identificare la corsa solo dopo che ti alleni continuamente per 2-5 minuti e le partite con la palla dopo che giochi continuamente a badminton o basket per 5 minuti.
VT3 LITE può essere accoppiato con i telefoni cellulari attualmente.
L'orologio potrebbe disconnettersi dall'APP VIRMEE dopo aver aggiornato l'APP o sostituito il telefono cellulare. Prova le istruzioni seguenti:
Annulla l'accoppiamento dell'orologio con il telefono cellulare, quindi riparali di nuovo.
Spegni il Bluetooth sul tuo telefono cellulare e riaccendilo.
Assicurati che l'orologio non sia accoppiato con un altro telefono cellulare.
No, puoi disattivare il Bluetooth se non hai bisogno di ricevere messaggi sull'orologio o sincronizzare i dati sull'orologio.
Assicurati di aver consentito all'APP VIRMEE di funzionare in background sul tuo telefono cellulare.
Assicurati che lo schermo dell'orologio sia acceso e tieni l'orologio vicino al tuo telefono cellulare (entro 10 metri).
Consenti all'APP VIRMEE di accedere alla tua posizione; in caso contrario, non sarà in grado di cercare nell'orologio.
Assicurati che l'orologio non sia accoppiato con un altro telefono cellulare.
Consenti all'APP VIRMEE di accedere alla memoria del tuo cellulare. Vai su Profilo> Permission settings > Storage permissions nell'APP per verificare se l'opzione di Storage permissions è attiva.
Assicurati che la rete del tuo cellulare sia in buone condizioni.
Tieni l'orologio il più vicino possibile al tuo cellulare.
Passo 1: vai alle impostazioni Bluetooth del tuo cellulare.
Passo 2: trova il tuo orologio nell'elenco Bluetooth, quindi annulla l'abbinamento.
Passo 3: associa nuovamente l'orologio al telefono cellulare tramite l'APP VIRMEE. Durante l'accoppiamento, consenti all'orologio di accoppiarsi e ricevere notifiche dal tuo telefono cellulare se sono presenti finestre pop-up.
Vai alle impostazioni del tuo cellulare, quindi disabilita l'autorizzazione alle notifiche per VIRMEE APP.
Disattiva il Bluetooth sul tuo telefono cellulare.
Vai su Attrezzature > Do not disturb nell'APP VIRMEE per impedire all'APP di inviare notifiche all'orologio.
No, VT3 LITE non ha attualmente un sensore GPS.
Solleva l'orologio da una posizione verticale a una orizzontale e lo schermo si accenderà automaticamente.
Premere a lungo il pulsante di accensione per 3-4 secondi per accendere / spegnere l'orologio.
Passo 1: assicurati di aver accoppiato l'orologio al tuo telefono cellulare.
Passo 2: imposta gli allarmi nell'APP VIRMEE, quindi scorri verso il basso sull'interfaccia Sport dell'APP VIRMEE per sincronizzare i dati sull'orologio.
Passo 1: scaricare e installare l'APP VIRMEE, quindi registrare un account.
Passo 2: attiva il Bluetooth del telefono cellulare. Avvia l'APP per cercare e connettersi al Bluetooth dell'orologio.
Passo 3: l'orologio sincronizzerà automaticamente l'ora, la data e la settimana del telefono cellulare.
È necessaria circa un'ora e mezza per raggiungere una carica completa.
Passo 1: collega l'estremità USB del cavo di ricarica a un adattatore USB, un power bank o una porta USB.
Passo 2: tenere l'altra estremità del cavo di ricarica per avvicinarsi ai pin di ricarica sul retro dell'orologio finché non si attaccano magneticamente.
* Se il cavo di ricarica non può essere collegato magneticamente ai pin di ricarica dell'orologio, cambia la direzione.
VT3 LITE è compatibile con iOS 10.0 o successivo.
VT3 LITE è compatibile con Android 5.0 o versioni successive.
Sì, è impermeabile e classificato IP68.
La confezione include un orologio VT3 LITE, due cinturini di ricambio, un cavo di ricarica e un manuale utente.
VT3 LITE non viene fornito con una fotocamera, ma puoi toccare l'orologio per controllare il tuo telefono cellulare per scattare foto dopo aver abilitato l'opzione Easy fotocamera nell'interfaccia del Attrezzature dell'APP VIRMEE.
No, non puoi.
È possibile toccare e tenere premuta la schermata iniziale per cambiare il quadrante dell'orologio.
Passo 1: capovolgi l'orologio, quindi premi la leva di rilascio rapido verso l'interno e tira via delicatamente il cinturino dell'orologio originale.
Passo 2: prendi un altro cinturino, fai scorrere il perno nella tacca dell'orologio, quindi premi la leva di rilascio rapido verso l'interno e fai scorrere l'altra estremità del cinturino in posizione.
Passo 3: rilasciare la leva di rilascio rapido quando i perni su entrambe le estremità sono inseriti saldamente nella tacca.
El reloj mide el patrón de sueño y de vigilia analizando sus movimientos.
*Cuando permanece quieto durante un cierto período de tiempo (por ejemplo, jugando con su teléfono móvil o leyendo en su cama), el reloj considerará su movimiento como sueño y comenzará a rastrearlo.
*Si se levanta y luego camina más de 25 pasos, el reloj considerará su movimiento como despierto y dejará de registrarlo.
La duración del seguimiento del sueño es de 8:00 p.m. a 9:00 a.m.
Por favor, permita que la APP VIRMEE acceda al almacenamiento de su teléfono móvil. Vaya a Perfil > Permission settings > Storage permissions en la APP para comprobar si la opción de Storage permissions está activada.
El reloj sólo registra sus datos de sueño de 8:00 p.m. a 9:00 a.m.; no registrará los datos para el sueño diurno.
Normalmente tarda 2 minutos en terminar la sincronización de los datos. Por favor, permanezca en la página de la APP cuando sincronice los datos.
El reloj permite el seguimiento del sueño de forma predeterminada.
Por favor, lleve el reloj un dedo por debajo del hueso de la muñeca y asegúrese de que el mismo se ajusta cómodamente a su piel.
Como todos los productos para la monitorización de la frecuencia cardíaca, la precisión del sensor de la frecuencia cardíaca está influenciada por el estado fisiológico del individuo, la posición del reloj y el tipo de deportes.
Para garantizar la precisión de los datos de frecuencia cardíaca, lleve el reloj con un dedo de ancho (cuando no esté haciendo ejercicio) o con dos dedos de ancho (cuando esté haciendo ejercicio) por debajo del hueso de la muñeca, y colóquelo cómodamente contra la piel.
Si activa la opción de Frecuencia cardíaca automática en la interfaz del Dispositivo de la APP VIRMEE, el reloj comprobará automáticamente su frecuencia cardíaca cada 10 minutos. También puede comprobar el diagrama de frecuencia cardíaca de 24 horas en la APP.
Basándose en la cantidad de luz reflejada que cambia según su volumen sanguíneo, la frecuencia cardíaca puede medirse con sensores ópticos en el reloj, que infieren la frecuencia cardíaca.
Por lo tanto, por favor, coloque el reloj cómodamente contra su piel, pulse en el reloj y asegúrese de que los indicadores debajo del reloj parpadeen en verde cuando pruebe su frecuencia cardíaca.
El reloj se restaurará a los ajustes de fábrica. Todos los datos y ajustes serán borrados.
Unos 5 a 7 días
Si el reloj no puede recibir notificaciones push desde su teléfono móvil después del emparejamiento, por favor, siga las siguientes instrucciones.
Paso 1: Desvincule el reloj de su teléfono móvil en la APP VIRMEE.
Paso 2: Para el iPhone, ignore VIRMEE_XXXX en los ajustes de Bluetooth de su teléfono móvil.
Paso 3: Inhabilite primero el Bluetooth de su teléfono y luego actívelo.
Paso 4: Encienda la APP VIRMEE para buscar y conectarse al Bluetooth del reloj.
Nota: Para el iPhone, asegúrese de permitir que el reloj se conecte y reciba notificaciones de su teléfono móvil si hay ventanas emergentes. De lo contrario, el reloj no podrá recibir notificaciones.
Paso 1: Descargue e instale la APP VIRMEE en APP Store o Google Play, y luego registre una cuenta.
Paso 2: Siga las instrucciones en la APP para crear su perfil.
Paso 3: Active el Bluetooth en su teléfono móvil.
Paso 4: Encienda el reloj, deslícese hacia la izquierda/derecha para seleccionar Ajustes y luego pulse Información para comprobar el nombre Bluetooth del reloj.
Paso 5: Pulse Dispositivo > + > BUSCAR DE NUEVO en la APP, luego pulse VT3 Lite-XXXX para conectarse.
Por favor, permita que la APP VIRMEE acceda a los contactos de su teléfono móvil.
Sí, usted puede.
Le sugerimos que rellene con precisión algunos datos básicos en la APP VIRMEE, como el sexo, la edad, la altura, el peso, etc., lo que mejorará la precisión del podómetro.
Actualmente, el reloj sólo puede identificar la carrera después de hacer ejercicio continuado durante 2-5 minutos, y los juegos de pelota después de jugar de forma continua al bádminton o al baloncesto durante 5 minutos.
El VT3 LITE puede ser emparejado actualmente con los teléfonos móviles.
El reloj puede desconectarse de la APP VIRMEE después de actualizar la APP o de cambiar el teléfono móvil. Pruebe con las instrucciones que se indican a continuación:
Desempareje el reloj de su teléfono móvil y luego emparéjelo de nuevo.
Apague el Bluetooth de su teléfono móvil y vuelva a encenderlo.
Asegúrese de que el reloj no esté emparejado con otro teléfono móvil.
No, puede desactivar el Bluetooth si no necesita recibir mensajes en el reloj o sincronizar datos con el reloj.
Asegúrese de haber permitido que la APP VIRMEE se ejecute en segundo plano en su teléfono móvil.
Asegúrese que la pantalla del reloj esté encendida, y mantenga el reloj cerca de su teléfono móvil (en un radio de 10 metros).
Permita que la APP VIRMEE acceda a su ubicación; de lo contrario, no podrá buscar en su reloj.
Asegúrese de que el reloj no esté emparejado con otro teléfono móvil.
Por favor, permita que la APP VIRMEE acceda al almacenamiento de su teléfono móvil. Vaya a Perfil > Permission settings > Storage permissions en la APP para comprobar si la opción de Storage permissions está activada.
Asegúrese de que la red de su teléfono móvil está en buenas condiciones.
Mantenga el reloj lo más cerca posible de su teléfono móvil.
Paso 1: Vaya a la configuración de Bluetooth de su teléfono móvil.
Paso 2: Encuentre su reloj en la lista de Bluetooth y luego desemparéjelo.
Paso 3: Vuelva a emparejar el reloj con tu teléfono móvil a través de la APP VIRMEE. Durante el emparejamiento, por favor, permita que el reloj se empareje y reciba notificaciones de su teléfono móvil si hay ventanas emergentes.
Vaya a la configuración de su teléfono móvil y desactive los permisos de notificación para la APP VIRMEE.
Desactive el Bluetooth en su teléfono móvil.
Vaya a Dispositivo > No Molestar en la APP VIRMEE para bloquear el envío de notificaciones a su reloj por parte de la APP.
No, el VT3 LITE no tiene un sensor GPS actualmente.
Levante su reloj de una posición vertical a una horizontal, y la pantalla se iluminará automáticamente.
Presione el botón de encendido durante 3-4 segundos para encender o apagar el reloj.
Paso 1: Asegúrese de que ha emparejado el reloj con su teléfono móvil.
Paso 2: Ajuste las alarmas en la APP VIRMEE, luego pase el dedo por la interfaz Sport de la APP VIRMEE para sincronizar los datos con su reloj.
Paso 1: Por favor, descargue e instale la APP VIRMEE, y luego registre una cuenta.
Paso 2: Encienda el Bluetooth de su teléfono móvil. Inicie la APP para buscar y conectarse al Bluetooth del reloj.
Paso 3: El reloj sincronizará automáticamente la hora, la fecha y la semana de su teléfono móvil.
Tarda aproximadamente una hora y media en cargarse completamente.
Paso 1: Conecte el extremo USB del cable de carga a un adaptador USB, un banco de alimentación o un puerto USB.
Paso 2: Sostenga el otro extremo del cable de carga para acercarse a las clavijas de carga de la parte posterior del reloj hasta que se fijen magnéticamente.
*Si el cable de carga no puede fijarse magnéticamente a las clavijas de carga del reloj, cambie la dirección del mismo.
El VT3 LITE es compatible con el iOS 10.0 o posterior.
El VT3 LITE es compatible con Android 5.0 o posterior.
Sí, es resistente al agua y tiene un grado de protección IP68.
El paquete incluye un reloj VT3 LITE, dos correas de repuesto, un cable de carga y un manual de usuario.
El VT3 LITE no incluye una cámara, pero puede pulsar el reloj para controlar su teléfono móvil para hacer fotos después de habilitar la opción de Camera remota en la interfaz del Dispositivo de la APP VIRMEE.
No, no puede.
Puede pulsar y mantener pulsada la pantalla de inicio para cambiar la esfera del reloj.
Paso 1: Gire el reloj, luego presione la palanca de liberación rápida hacia adentro y tire suavemente de la correa original del reloj.
Paso 2: Tome otra correa, deslice el pasador en la muesca del reloj, después presione la palanca de liberación rápida hacia adentro y deslice el otro extremo de la correa del reloj en su lugar.
Paso 3: Suelte la palanca de liberación rápida cuando los pasadores de ambos extremos estén bien insertados en las muescas.
時計は、あなたの動きに応じて睡眠や覚醒を認識します。
*睡眠時には、時計があなたの行動を睡眠と認識し、監視を開始します。
*覚醒した場合は、時計が覚醒と認識して監視を停止します ※立ち上がって25歩以上歩くと、時計が覚醒と認識して監視を停止します。
睡眠モニタリングは夜8時から朝9時まで対応しています。
VIRMEE アプリがスマホのストレージ容量にアクセスできるようにしてください。アプリ内の「個人プロフィール」→「権限設定」→「ストレージの許可」で「ストレージの許可」を確認してください。 スイッチが入っているかどうか
この時計は午後8時から午前9時までの睡眠データを記録するだけで、日中の睡眠データは記録しません。
通常データ SYNC を完了するために腕時計のための 2 分を要します。データを同期する際は、アプリ内のデータを同期するページに留まってください。
この時計は、デフォルトで睡眠モニタリングをサポートしています。
腕時計を手首の骨から指一本分離して着用し、肌に密着するようにします。
心拍センサーの精度は、他の心拍数モニタリング製品と同様に、個人の生理的状態、時計を着用する場所、運動の種類によって影響を受けます。
心拍数データの正確性を確保するために、運動をしていない時は手首の骨から指1本分、運動をしている時は手首の骨から指2本分離して時計を着用し、肌に密着させてください。
VIRMEEアプリの「デバイス」画面で「自動的に心拍数測定」機能を有効にすると、10分ごとに時計が自動的に心拍数をテストしてくれます。また、アプリ上で24時間心拍数のグラフを見ることができます。
血液の量に応じて反射光の量が変化し、時計の光学センサーが反射光の量の変化に基づいて心拍数を計測します。 そのため、時計を肌に近づけて持ち、時計のをそっと押して、心拍数をテストするときに時計のインジケーターランプが緑色に点滅していることを確認してください。
時計は工場出荷時の設定に戻り、すべてのデータと設定が削除されます。
通常は約5~7日
時計をペアリングした後、スマホからのプッシュ通知を受信できない場合は、以下の手順に従ってください。
ステップ1:VIRMEEアプリでスマホから時計のバインドを解除します。
ステップ2:iOSデバイスの場合は、お使いの携帯電話のBluetooth設定でVIRMEE_XXXXを無視します。
手順3:まずBluetoothを無効にしてから再度有効にします。
ステップ4:VIRMEEアプリを開き、検索して時計をBluetoothに接続します。
注:iOSデバイスの場合、ポップアップウィンドウがある場合は、時計が携帯電話とペアリングされ、通知を受信していることを確認してください。 そうしないと、時計に通知が届きません。
ステップ 1: App StoreまたはGoogle PlayでVIRMEEアプリをダウンロードしてインストールし、アカウントを登録します。
ステップ2:アプリ内の指示に従ってプロフィールを作成します。
ステップ3:スマホのBluetoothをオンにします。
ステップ4:時計の電源を入れて、左右にスワイプして「設定」を選択し、「デバイス情報」をクリックすると、時計のBluetooth名が表示されます。
手順5:アプリ上で、「デバイス」>「+」> 「再検索」 をタップして、VT3 Lite-XXXX」をタップして接続します。
VIRMEEアプリで携帯電話の連絡先リストにアクセスできるようにしてください。
はい、できます。
VIRMEEアプリでは、性別、年齢、身長、体重などの基本的な情報を正確に記入することで、万歩計の精度を高めることをおすすめします。
現在は、時計は2~5分連続で運動した後にランニング状態と認識するか、5分連続でバドミントンやバスケットボールをした後に球技と認識します。
現在は、この時計は電話とのBluetooth接続のみをサポートしており、タブレットやノートパソコンなどのモバイルデバイスはサポートしていません。
VIRMEE アプリをアップデートしたり、スマホを入れ替えたりすると、時計がアプリから外れることがあります。 以下の動作を試してみてください。
スマホから時計をペアリング解除し、再度ペアリングします。
スマホのBluetoothをオフにして、再度オンにする
時計が他の携帯電話とペアリングされていないことを確認してください。
いいえ、時計でメッセージを受信したり、時計にデータを同期したりする必要がない場合は、Bluetoothをオフにすることができます。
お使いの携帯電話のバックグラウンドでVIRMEEアプリが実行できるようになっていることを確認してください。
時計の電源が入っていることを確認し、電話機に時計を近づける(10m以内)
VIRMEEアプリで位置情報へのアクセスを許可すると、時計の検索ができなくなります。
時計が他の携帯電話とペアリングされていないことを確認してください。
VIRMEE APPが携帯電話のストレージ容量にアクセスできるようにしてください。アプリ内の「個人プロフィール」→「権限設定」→「ストレージの許可」で「ストレージの許可」を確認してください。 スイッチが入っているか?
携帯電話のネットワークが良好な状態であることを確認してください。
腕時計をできるだけスマホに近づけておく
ステップ1:お使いの携帯電話のBluetooth設定に移動します。
ステップ2:Bluetoothリストで時計を見つけて、ペアリングを解除します。
ステップ3:再びVIRMEEアプリを使って時計とスマホをペアリングします。
ペアリング中、ポップアップウィンドウがある場合は、時計を携帯電話とペアリングし、通知を受信できるようにします。
スマホの設定で、VIRMEEアプリの通知受信許可をオフにします。
スマホのBluetoothをオフにします。
VIRMEEアプリの「デバイス」→「邪魔しないでください」と進み、時計への通知送信を無効にします。
いいえ、VT3 LITEには現在GPSセンサーが搭載されていません。
時計を縦位置から横位置に回転させると、画面が自動で点灯します。
電源ボタンを3~4秒長押しして、時計のオン/オフを切り替えます。
ステップ1:腕時計とスマホをペアリングしたことを確認します。
手順2:VIRMEEアプリでアラームを設定し、アプリの「スポーツ」画面を下にスワイプして時計にデータを同期させます。
ステップ1:VIRMEEアプリをダウンロードしてインストールし、アカウントを登録してください。
ステップ2:スマホのBluetoothをオンにして、アプリ検索を開始し、Bluetoothを見るために接続します。
ステップ3:時計が自動的にスマホと時刻、日付、曜日を同期させます。
のフル充電には1.5時間ほどかかります。
ステップ1:充電ケーブルのUSBポートをUSBアダプタ、動機電源またはUSBポートに差し込みます。
ステップ2:充電ケーブルのもう一方の端を時計の背面にある充電ピンに近づけるようにして、それらが磁気的に取り付けられるまで保持します。
*充電ケーブルが時計の充電針に磁気的に取り付けられない場合は、向きを変えてください。
VT3 LITEはiOS 10.0以降に対応しています。
VT3 LITEはAndroid 5.0以降に対応しています。
VT3 LITEは防水仕様で、保護等級IP68を取得しています。
パッキングリストには、VT3 LITE時計、スペアストラップ2本、充電ケーブル、取扱説明書が含まれています。
VT3 LITEには独自のカメラは搭載されていませんが、VIRMEEアプリの「デバイス」インターフェースで「カメラ撮影」を有効にしておけば、時計をタップしてスマホを操作して写真を撮ることができます。
できません。
ホーム画面を長押しすることでダイヤルを変更することができます。
ステップ1:時計を裏返して、クイックリリースレバーを内側に押し、元のストラップをそっと引き出します。
ステップ2:もう片方のストラップを持って、時計の溝にピンを差し込み、クイックリリースレバーを内側に押し込みます。
ステップ3:時計の両端のピンが溝にしっかりと差し込まれたら、クイックリリースレバーを離します。